A serious pyrolysis proposal starts with your project conditions, not with a reactor model. Feedstock, capacity, product destination, operating mode, site conditions, utilities, and investment scope all affect the final configuration. Preparing these inputs helps you receive a solution that is closer to your actual project.
1. Is Your Feedstock Clearly Defined?
“Waste tire,” “plastic,” or “oil sludge” is not enough for equipment selection.
Feedstock Composition Determines the Process
For tires, you need to confirm whether you process whole tires, tire chips, or rubber granules. For plastics, PE, PP, PS, PVC, PET, moisture, and impurities matter. For oil sludge, oil, water, solids, viscosity, and sediment content affect the process.
Based on your feedstock characteristics, Yushunxin can match the pyrolysis plant configuration required pretreatment, feeding, pyrolysis, condensation, and discharge equipment.
2. Do You Have Stable Feedstock Supply?
Your plant capacity should match the amount of material you can continuously secure.
If you plan a 10 TPD project, can you supply enough qualified feedstock every day? An oversized reactor only increases investment if your material supply cannot support it.
For different project scales, Yushunxin provides configurations ranging from about 1 TPD batch pyrolysis equipment to 20 TPD semi-continuous systems and up to 50 TPD continuous pyrolysis lines, allowing capacity to follow your real feedstock supply.
3. Have You Defined Your Target Products?
What will you do with your pyrolysis oil, carbon black, steel wire, and gas?
Product Destination Changes the Configuration
If you only sell crude products, the downstream system can remain simple. Higher-value products require additional processing.
Pyrolysis oil: filtration → distillation → condensation → refined industrial fuel / non-standard diesel
Carbon black: grinding → classification → upgraded carbon powder
Advanced carbon: purification → graphitization → grinding/classification → graphitized carbon material
Recommended Reading：https://www.pyrolysisplantpro.com/pyrolysis-carbon-black-upgrading-line-for-conductive-material-applications/
Steel wire: separation and cleaning → scrap steel recycling
Non-condensable gas: purification → reuse as heating fuel
Yushunxin can design the pyrolysis line around your downstream product route, including oil refining, carbon upgrading, or gas reuse modules where required.
4. Have You Decided How the Plant Will Operate?
Do you expect batch production, semi-continuous operation, or long-term continuous processing?
Your working hours, labor arrangement, feedstock form, automation level, and maintenance schedule all affect this choice.
Based on your production plan, Yushunxin can configure different feeding, discharge, cooling, automation, and material-preparation systems for batch, semi-continuous, or continuous operation.
5. Is Your Site Ready for the Plant?
Your available land affects equipment arrangement, storage areas, transportation routes, oil tanks, maintenance access, and safety spacing.
If you provide your site dimensions, Yushunxin can plan the equipment layout according to material flow, operating access, storage requirements, and future expansion, rather than simply placing the reactor on the available land.
6. Are Utilities and Environmental Requirements Confirmed?
What fuel, electricity, and cooling water are available at your site? You also need to consider local requirements for smoke, VOCs, dust, wastewater, fire protection, and industrial safety.
Based on these conditions, Yushunxin can match the burner, cooling-water system, gas purification, dust collection, safety protection, and emission-control equipment to your project environment.
7. Is Your Investment Scope Clearly Defined?
Do you need only a pyrolysis reactor, a complete production line, or a project covering pretreatment, pyrolysis, and downstream processing?
Before requesting a proposal, prepare your feedstock, daily capacity, operating hours, installation country, available land, utilities, target products, and environmental requirements.
With these details, Yushunxin can define the project scope and combine the required pretreatment, pyrolysis, condensation, environmental-control, and downstream processing systems into a more practical project proposal instead of a generic machine quotation.
Visiting: https://www.pyrolysisplantpro.com/industrial-waste-pyrolysis-plant/
Leave a Reply